Specifications

Line Programming DXP Correspondence Manual
8.11
When a distant party abandons a hold condition and his or her station
Abandon Hold
disconnects from the line, the central office sends a forward
disconnect signal to the system. This signal is either 50 or 350 msec.
Release long. Use this procedure to program the line port to match the central
office signal length.
8.12
I
When a station drops a line after its user has finished using it, the
Positive
system waits a programmable length of time before it allows another
station to access that line. This time delay helps prevent such
Disconnect Time
conditions as call-collision. The system holds the line status light on
during the time out period .
8 - 8 Line Programming