Specifications

8.6
Automatic
Privacy (Privacy
Release)
8.7
SMDR
Assign privacy release to a line so that a user can press the privacy
button on his or her telephone and change a private line into a
non-private one as needed. When a line is private, a station user has
exclusive use of it during a call. Also refer to section 7.37, Button,
Mapping, to map a privacy button on the user’s telephone.
When you enable this feature, the system stores SMDR information
for the specified line. Refer to section 10 for other SIvIDA/SMDR
programming considerations.
8.8 If you have arranged for the system to cost calls, you can arrange for it
Cost Incoming
I
to also cost incoming calls on a per-line basis. You can arrange for the
costing to begin as soon as the call arrives in the system, to begin after
the user answers the call, or to begin after a programmed delay. Plus,
you can pick the call-rate table that you want the system to use when it
costs the call. Refer to section 12 for other automatic route selection
programming considerations.
Line Programming 8 - 5