Specifications

Station Programming
DXP Correspondence Manual
7 37
Button Mapping
I
The system assigns certain functions to each of the station buttons as a
default condition. Reassign the button functions with this
programming feature. You can assign functions at a first level or at a
By Station
second level at each button. Assign functions at the first level that
require status light feedback because the system does not provide
status light feedback to buttons at the second level (press CONTROL
N to display the second level).
You can also use this procedure to map the buttons on a DSS/BLF
console (press CONTROL N to display the console buttons) but first
you must use the Section 7.27, DSSYBLF Consoles Installed,
procedure to assign the console to the station and name the console
port.
7 - 20 Station Programming