Specifications

DXP Correspondence Manual Station Programming

7,33

Interactive

Button Support

(Softkeys Setup)

The system provides support for interactive buttons on LCD

speakerphones with product codes of 7010s and 7016s (all revisions),

and 7700s (revision H and earlier). The three interactive buttons and

the associated expanded displays provide quick, easy access to‘system

features and straight-forward button programming without the need

for dialing codes. At default, the interactive button support is

disabled; therefore, you must take programming action to enable it.

When you enable them, the system overrides any previous mapped

function at the buttons with this new assignment. If, after you have

enabled the support, you take new action to button map any of the

interactive buttons to another assignment, the new assignment will

take effect at that button, In addition, the system will clear the

remaining two buttons and disable the interactive button support. If

you replace any of these LCD speakerphones with a non-display

telephone, the system recognizes it as such and does not assign

interactive buttons to it. Since the system allows you to enable

interactive buttons with station programming action, it does not

provide a means for assigning interactive buttons with the button

mapping procedure. After you have enabled the interactive buttons,

you can look at the button assignments with the button mapping

procedure, and note that the system identifies them as

SOFTl,

SOFT2,

and SOFT3.

Station Programming 7