Specifications

Sfafion /Jrogrammiflg DXP Correspondence Manual
7.22
Through Dialing
(Thru-Dialing)
7.23
Single Line
Propriefary
Telephone TAP
Button
7.24
Ringing On Busy
(Enhanced
Subdued
Ringing)
This procedure allows DTMF tones generated by an external device
connected to the system to pass through the system and out to any line
connection.
Use this procedure to set the function of the TAP button on single line
proprietary telephones.
When a telephone is busy on a call and another call comes to that
telephone, the system subdues the ringing of the second call to a lower
volume but allows the call to continue to ring at this subdued volume
until the caller abandons it. The system shortens the ringing of another
call to model 8024S, 8124S, 8012S, and 8112s speakerphones that are
busy in the speakerphone mode to one quick tone burst; however, if
these telephones are busy in an off-hook manner (non-speakerphone
mode), the system still subdues the ringing of the second call to a
lower volume and allows the call to continue to ring at this subdued
volume until the caller abandons the call.
If a user does not wish to hear subdued ringing while he or she is busy
on a call (even the one quick tone burst on those particular models that
provide it) you can take this programming action to eliminate all
ringing by a second call.
7 - 12 Station Programming