Specifications

Station Programming
DXP Correspondence Manual
z12
Defaulf Forward
TYPe
Use this procedure to arrange the call forward default scheme for
individual stations. With this feature, the system will automatically
forward ringing calls to another station after a preset number of rings.
Since this is an automatic forwarding of the calls, the station users do
not have to take any action; however, any user-enabled call
forwarding that they take at their stations will override this automatic
call forwarding. This procedure determines whether or not intercom
busy/RNA call forwarding can take place at a station. You must also
program the number of rings that must occur before this automatic call
forwarding can take place (section 7.14). For additional call
forwarding considerations, see section 6.6.
Intercom Number Forwarded To
Use this procedure to assign the intercom number of a station to
receive another station’s forwarded calls.
Forward Type (For Busy Or Ring - No Answer i=alls)
Use this procedure to arrange what type of calls will forward from the
station. You must also program the number of rings that must occur
before this automatic call forwarding can take place (section 7.14).
7 - 6 Station Programming