Specifications

Station Class Of Service DXP Correspondence Manual
6.39
Forced Account
Codes
After you have enabled the account code feature for the system, have
set its parameters, and have programmed its list of account codes into
the system, turn the feature on for a station class of service and make
it either forced or optional. If you make it a forced account code, the
user must enter an account code before the system will let him or her
dial the number for an outgoing call. Also, on incoming calls a user
must enter an account code before the system will allow him or her to
make any future outgoing calls. See section 10.2 for other account
code programming considerations and section 10.3 for an exception to
forced account code entry.
NOTE: Changing the account code length will default the entire
table.
6.40
I
When you activate this feature, users calling a busy station from an
A//ow BUSY
LCD speakerphone can read the busy status of the called station on the
telephone’s display. (for example, Busy with line 2).
Display (Display
With the feature inactive, the display shows busy but does not reveal
Of Busy Status) the busy status.
6.41
Clear Major
Alarm Ring
This feature allows users to clear the major alarm ring condition from
a telephone station. To make this feature available to users, you must
first program a class of service as described below and then assign that
class of service to the user’s telephone station.
6 - 22 DXP Correspondence Manual