Specifications

Station Class Of Service
DXP Correspondence Manual
6.26
System Speed
Dial Groups
6.27
Directed Station
Hold
6.28
Remote Station
Disable
The system provides 500 system speed dial numbers (200 speed dial
number in DXP rev. 4 and earlier). These numbers are divided into 50
groups with 10 numbers available in each group. Assign none, one, or
a range of groups (n -nn) to each station class of service. Refer to
section 5.9 for additional speed dial considerations.
This feature, when enabled, allows station users to pick up the last call
a user placed on hold at another station. This feature does not allow
users to pick up exclusive hold calls or calls that are in the process of
being transferred. Also, the feature does not allow users to send a
directed call hold to a station where its user is scanning the currently
held calls. In addition, this feature allows users to place a call on hold
at another station and have this call appear to be the one that has been
on hold there for the longest time. Features such as hold recall apply
to the station that sent the directed call hold and not to the station that
received the directed call hold.
With software release 6.A, this feature, when enabled, allows users at
stations to dial a code and remotely disable or enable another station.
Normally, you should give this capability to the system attendant, but
you can assign it to any class of service that is appropriate.
6 - 16 DXP Correspondence Manual