Specifications
DXP Correspondence Manual
Sys
tern Programming
Relays
External Paging Equipment Control
The relays serve two different purposes: you can use them to control
an external paging amplifier, or you can use them to track the ringing
signal on any or all line ports. If you connect customer-supplied
external paging equipment to the system’s external paging port and
that equipment requires external control, use this programming
procedure to assign a relay to control the paging equipment. Relays
one and two are associated with jack number three on the CPU board,
while relays three and four are associated with jack number four on
the CPU board. The relays menu lists the following items:
-
direct ring,
-
delayed ring,
-
number one day mode,
-
number two day mode,
-
and the night mode of ringing for the various lines.
Relays
Line Answer From Any Station
Assign one or more of the four relays located on the central processor
board to track the ring signal of any or all line ports. You can arrange
for a relay to track the ringing of the direct, delayed, day 1, day 2, or
night ringing modes. Typically, installers wire these relays to control
loud bells or other external ringers. Users, upon hearing the external
ringers, can dial feature codes to answer the call that is ringing on the
associated lines.
Common Audible Ringer
If you connect a customer-supplied external paging equipment to the
system’s external paging port, use this programming procedure to
arrange for that equipment to sound the ring signal of any or all lines.
You can arrange
for.it
to track the ringing of the direct, delayed, day I,
day 2, or night ringing modes. Upon hearing the ringing over the
external paging equipment, the user can dial feature codes to answer
the call that is ringing on the associated lines. Refer to Section 7.14 to
assign lines to the ringing modes.
NOTE: You can assign the same ringing pattern to an unused and
unconnected relay that you assign to the external paging
equipment. If you do this, station users can dial the call
pick up codes associated with the assigned relays to
answer the calls that sound over the external paging
equipment.
DXP Correspondence Manual 5
-
33