Specifications

System Programming DXP Correspondence Manual
Line Disconnect Automatic Camp-On
If a user at a current station selects a line that a previous station has
released from busy but the system has not yet returned to idle, the
system arranges for the current station to camp-on to the line before
the system makes the line idle. After the system makes the line idle, it
immediately connects the camped-on station to the line. With this
feature disabled, a station cannot select a line until after the system has
returned the line to idle. Refer to Section 8.12 to set the time that the
system waits before it makes a line idle after a station releases it from
busy.
Automatic Station Relocation
The system will automatically recognize a particular station should
someone relocate it to a different station port. After being installed at a
new port location, a relocated station will provide the same class of
service parameters and station features that it provided at its original
port location. Also, the relocated station will respond to the same
personal intercom number that it responded to at its original port
location. A relocated station prompts the user to take action to either
accept its original programming or accept the programming at the new
port.
5 - 30 DXP Correspondence Manual