Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-45
2. Press [
set
setset
set]. The display shows:
FOLLOW FM _
bksp save chg
3. Input the extension number where calls are to be forwarded from.
4. Press [
save
savesave
save]. The display shows:
FOLLOW FM XXX
co icm/co icm
5. Select the type of calls to forward.
• co = CO Line incoming or transferred calls
• icm/co = both intercom and CO Line calls
• icm = intercom calls only.
The display shows:
PSWD :_
bksp save chg
6. Input the password of the extension where the calls are to be forwarded from.
7. Press [save]. You hear the confirmation tone, the extension returns to idle, and the display shows
FORWARD FROM XXX.
Follow Me from this extension to another extension:
1. Press [
preset
presetpreset
preset]. The display shows:
FOLLOW TO _
bksp save chg
2. Input the extension number where calls are to be forwarded from.
3. Press [save
savesave
save]. The display shows:
FOLLOW FM XXX
co icm/co icm
4. Select the type of calls to forward.
• co = CO Line incoming or transferred calls
• icm/co = both intercom and CO Line calls
• icm = intercom calls only.
You hear the confirmation tone, the extension returns to idle, and the display shows
FORWARD FROM
XXX.
Analog Ports (Single Line Telephones) – Activate
Call Forward may be invoked for several operation modes. Each mode may also be invoked for these call
conditions:
1 = CO calls only, 2 = CO and Intercom calls, 3 = Intercom calls only.
Immediate Forward: dial
/22, (extension #), 1/2/3 option.
Busy Forward: dial /21, (extension #), 1/2/3 option.
No Answer Forward: dial /24, (extension #), 1/2/3 option, t
1
, t
2
.
(t
1
+ t
2
are time settings. t
1
is - time the first call to your extension following inactivity at your extension will
ring before forwarding. t
2
is the time all calls after the first to your extension will ring before forwarding.)