Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-38
• Continue to press [
next
nextnext
next] until Alternate displays.
Or…
• Press the Volume button and input 04-02-1-06, [save
savesave
save] to advance to the Alternate Attendant
database item for this tenant group.
• Press [chg
chgchg
chg] to change the contents of this database item.
• Input the appropriate extension number that will serve as the Alternate Attendant for this tenant group.
• Press [save
savesave
save].
• Press [next
nextnext
next] to view DSS Console(s) assignments for this extension and to advance and select the
next tenant group to program an Attendant and Alternate Attendant.
Or…
• Press
the Volume button and enter the Index for the appropriate database item for the appropriate
tenant group. Use the following table for Index information:
Index Database Item Selected
04-02-1-01 Tenant Group 1 Attendant
04-02-1-06 Tenant Group 1 Alternate Attendant
04-02-2-01 Tenant Group 2 Attendant
04-02-2-06 Tenant Group 2 Alternate Attendant
04-02-3-01 Tenant Group 3 Attendant
04-02-3-06 Tenant Group 3 Alternate Attendant
• Press the Hold button to return to the previous menu level or press Volume to return to the DB Item
Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “System Application.” Then press «.
• Use ¢£¤¥ to highlight “Category 2.” Then press «.
• Use
¢£¤¥ to highlight “Operator Code – Length.”
• Press
« until the appropriate code length displays.
• Use
¢£¤¥ to highlight “Operator Code.” Then press «.
• Input the appropriate Operator Code. (See Flexible Numbering Plan for guidelines on how to assign
directory numbers.)
• Press «.
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.