Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-31
• “Waiting Time” may be selected from the following choices: 10, 15, 20, 25, 30. Each time that [
chg
chgchg
chg] is
pressed the selection is incremented through the available choices.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«. The program title page displays.
• Press any key at the program title page to enter the Main Menu.
• Select PC-DBA from the Main Menu. The PC-DBA menu is then shown.
• Select Programming from the PC-DBA menu.
• Use
¢£¤¥ to highlight “Call Handling.” Then press «.
• Use ¢£¤¥ to highlight “Category 2.” Then press «.
• Use
¢£¤¥ to highlight one of the three Automatic Redial data items and press «.
• “Attempts” requires input from the keyboard. Once you press «, you must input the appropriate value
from 0-2. (Note: “0” disables Auto Redial.) After the data has been input,
« must be pressed again to
store the new data move on to the next database item.
• “Interval” can be set to one of the available choices, which are selected in sequence with each press of
the
« key.
• “Waiting Time” can be set to one of the available choices, which are selected in sequence with each
press of the
« key.
• Continue programming other database items as required.
• When you have completed all changes, press
° (escape) to exit System Reminder programming. You will
be prompted to confirm exit request; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave System Reminder unchanged.
• Press “Y” to save changes.
• You will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave System Reminder unchanged.
• Press “Y” to save changes.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Automatic Selection (CO/Intercom) !95
This feature allows you to access a specific outside line or intercom (ICM) automatically when you lift the handset or
press the On/Off speakerphone button on a Digital Extension.
A line will not be accessed automatically when your telephone is receiving an incoming call (outside or intercom) or a
line is recalling at your telephone. However, you may override this incoming call priority operation by pre-selecting an
outgoing line before lifting the handset.
Related Features
Private Line CO Line Group
Ringing Line Priority