Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-25
• Program the various CO lines to ring at the appropriate Answering Positions in either Day Mode, Evening
Mode or both. (See CO Line Ring Assignment.)
• Record the Auto Attendant (AAM only) for Alternate Mode Message is required. (See Automated Attendant.)
• Program Time Switching times as appropriate. (See below.)
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Enter 08-15-1-02 to program Auto CO Line Ringing Modes - Time Switching for Tenant Group 1. (08-15-2-
02 for Tenant Group 2, 08-15-3-02 for Tenant Group 3)
• Press [
save
savesave
save]. The first day of the week (Sunday) displays.
• If changes are necessary for this day press [show
showshow
show]; otherwise, press [next
nextnext
next] until the day of the week for
which changes must be made displays. Then press [
show
showshow
show].
• The first time period for which the Service Mode may switch displays for the day selected; “ALT START”
(Alternate Start Time).
• Press [chg
chgchg
chg] to change this data.
Or…
• Press [
next
nextnext
next] to select the Service Mode for which a time schedule must be entered. (The data items that
can be changed are ALT START, ALT END, EVE START, EVE END.)
• When the Service Mode to be changed displays press [
chg
chgchg
chg] and input the new value in 24-hour format (e.g.,
1:00 PM is entered as 13:00).
• Press [save
savesave
save] to store this data.
Or…
• Enter 08-15-1-02-01 to program ALT START.
• Enter 08-15-1-02-02 to program ALT END.
• Enter 08-15-1-02-03 to program EVE START.
• Enter 08-15-1-02-04 to program EVE END.
• Continue programming as required.
• Press the
Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “System Application” and then press «.
• Use ¢£¤¥ to highlight “Time Switching” and then press «.