Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-22
pad single-digit from 0-9, *, or #. (Note: The system will not allow any digit to be assigned to more than one
function. Therefore the Inquiry Code and DISA Codes must be considered when changing the Waiting
Code.)
• Enter the new Waiting Code digit and press [
save
savesave
save] to store.
• Press [next
nextnext
next]. The next database item (Inquiry Code) displays.
• To change the Inquiry Code press [chg
chgchg
chg] (change). The Inquiry Code is assigned to provide a caller the
option to hear a general announcement (company hours, directions to the office, etc.). The code may be any
dial pad single-digit from 0-9, *, or #. (Note: The system will not allow any digit to be assigned to more than
one function. Therefore the Waiting Code and DISA Codes must be considered when changing the Inquiry
Code.)
• Enter the new Inquiry Code digit and press [
save
savesave
save] to store.
• Press [next
nextnext
next]. The next database item (DISA Code) displays.
• To change the DISA Code press [chg
chgchg
chg] (change). The DISA Code is assigned to provide a caller access to
any DX-80 system resource (e.g., extensions, CO lines, etc.). The code may be any dial pad single-digit
from 0-9, *, or #. (Note: The system will not allow any digit to be assigned to more than one function.
Therefore the Waiting Code and Inquiry Codes must be considered when changing the DISA Code.)
• Enter the new DISA Code digit and press [
save
savesave
save] to store.
• Press [next
nextnext
next]. The next database item (Answer Position) displays.
• To change the Answer Position press [show
showshow
show]. Since Answering Positions may be assigned as unique
destinations per Tenant Group, the system requires this input now.
• Enter the tenant group for which programming changes are to be made (1-3) (usually “1”) then press
[show
showshow
show]. The current Day Mode - Answer Position for the selected tenant group displays.
• Press [chg
chgchg
chg] (change) to enter a new destination for the Day Mode for this tenant group.
• Enter the appropriate DX-80 system directory number (extension, UCD group, Virtual Number) where
callers should be routed when they cannot be routed automatically.
• Press [save
savesave
save].
• Press [next
nextnext
next]. The current ALT (Alternate) Mode - Answer Position for the selected tenant group
displays.
• Press [
chg
chgchg
chg] (change) to enter a new destination for the ALT Mode for this tenant group.
• Enter the appropriate DX-80 system directory number (extension, UCD group, Virtual Number) where
callers should be routed when they cannot be routed automatically.
• Press [
save
savesave
save].
• Press [next
nextnext
next]. The current EVE (Evening) Mode - Answer Position for the selected tenant group
displays.
• Press [
chg
chgchg
chg] (change) to enter a new destination for the EVE Mode for this tenant group.
• Enter the appropriate DX-80 system directory number (extension, UCD group, Virtual Number) where
callers should be routed when they cannot be routed automatically.
• Press [
save
savesave
save].
• Press [next
nextnext
next]. The DX-80 system prompts for changes to another tenant group if necessary. If so, enter
that group number and follow the previous steps to complete programming for the selected tenant
group. Otherwise press to return to the previous programming level (Answer Position).
• Press [
next
nextnext
next]. The next database item (Auto Attendant Line) displays. Notice that the display prompts you
for the CO line directory number (740-755).
• Enter the CO line directory number (740-755) to be programmed for use with the automated attendant.
• Press [
show
showshow
show]. The next database item for Automated Attendant operation of this CO line (Auto_A Line)
displays.