Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-15
Attendant / Extension DSS Console
The Attendant/Extension DSS Console is a self contained digital terminal that interacts with a predetermined digital
speakerphone. The console has 60 programmable buttons that can be used for easy access to the DX-80 systems
many CO lines, extensions and features. The first forty-eight buttons have dual colored LED’s that allow status
monitoring of system resources such as CO Lines and Extensions. The remaining twelve buttons on the
Attendant/Extension Console may be used for any system feature or resource but are not equipped with LED’s.
Although usually considered to be an attendant feature benefit, the DSS Console can be assigned to any DX-80
digital speakerphone. A maximum of twelve (12) sixty-button Attendant/Extension Consoles may be added to the
system. Each requires its own dedicated digital port and therefore reduces the number of digital speakerphones that
can be connected to the system on a one-to-one basis. Any digital extension may be assigned four
Attendant/Extension DSS Consoles maximum.
Related Features
Direct Station Selection (DSS)/Busy Lamp Field (BLF) Speed Dial (System and Extension)
Attendant/Extension DSS Console Button Programming CO Line Assignment
Related Programming
System Resource - Attendant, DSS Allocation
Operation
The operation of each feature/directory number button will correspond with the associated feature. The DSS
Console adds 60 direct feature/resource access buttons to the 30 buttons provided on the digital
speakerphone.
Conditions
a) Each DSS Console has 48 dual-color LED buttons and 12 buttons without LEDs.
b) Each DSS Console required its own dedicated cable pair from the KSU.
c) 12 maximum DSS Consoles can be assigned in the DX-80 system.
d) 4 maximum DSS Consoles can be assigned to any one digital speakerphone (extension/attendant)
Default Setting
No Attendant/Extension Consoles are assigned in default.
Each DSS is “mapped” with a default button arrangement. Refer to Configuration in the Overview section of
this manual to view the DSS button map.
Programming Abstract
• Assign a DSS Console to the designated digital port via directory number (extension number assigned to
that digital port).
• Assign the DSS Console to operate with the designated digital speakerphone (owner).
• Program buttons on DSS Console as required if default map is not adequate for your application.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are interactive LCD button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!#* and then enter the DB Admin password
“
########.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input 04-14-01-01 to program the Owner of DSS Console #1.
• Press [save
savesave
save]. The current programming of the DSS Console #1 Owner displays.