Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-14
Note: Only valid extension directory numbers can be assigned as tenant group attendants. Extensions
that are programmed as Attendant for another Tenant Group or Alternate Attendant cannot be
programmed as the attendant.)
• Press [
save
savesave
save].
Program Attendant Extension User Password
• Reference “Extension User Password” for programming instructions of this feature. The default password is
9999.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then press «.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select “Programming” from the PC-DBA menu.
Program Attendant Extension
• Use
¢£¤¥ to highlight “System Resource” and then press «.
• The cursor is now positioned on the database item - “Attendant.”
• Press
«. The cursor is now positioned on the database item “Attendant - Tenant 1.”
• Press « to select this data item for change. The data item is ready for input.
• Enter the extension directory number to be assigned as the Attendant Extension.
• Press
« continue.
Program Alternate Attendant Extension
• Use
¢£¤¥ to highlight Alternate Attendant database item.
• Press « to select this data item for change. The data item is ready for input.
• Enter the extension directory number to be assigned as the Alternate Attendant Extension.
• Press
«.
• Use
¢£¤¥ to highlight the next database item to be changed and follow the conventions used in the
previous steps to complete any other changes required.
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: changes made via PC-DBA are NOT updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming Guide section of this manual to learn more about
this procedure.