Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-13
3. When multiple internal calls are waiting in queue for the attendant extension, the display indicates the
number of waiting calls in the display (the illustration shows two calls waiting):
LINE 3 01:45
-->> 2
Conditions
a) The Extension User Password programmed for the Attendant extension is required for entry into Attendant
Administration, Caller ID Table and Ring Mode. The default password is 9999.
b) Only the designated Attendant extension can manually change the system Ring Mode.
c) Only the designated Attendant extension can manually change extension Room Status (Hotel Mode).
d) The Attendant extension receives all calls via any extension that invokes Forced Intercom Call Forward.
Default Setting
Extension 101 is the system programmed Attendant.
Extension 101 User Password is 9999.
Programming Abstract
• Program the selected extension as the Attendant extension.
• Program the selected extension as the Alternate Attendant extension.
• Program Attendant extension User Password. (Note: Reference User Password for programming
instructions of this feature.)
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are interactive LCD button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!#* and then enter the DB Admin password
“
########.” (Note: This eight-character can be changed.)
• Press [show
showshow
show]. The DB Item Select screen displays.
Program Attendant Extension
• Enter 04-02-1-01 to program the attendant extension for Tenant Group 1. (04-02-2-01 for Tenant 2 Group,
04-02-3-01 for Tenant Group 3.)
• Press [
save
savesave
save].
• To change the designated attendant extension press [chg
chgchg
chg] (change).
• Enter the extension number to be assigned as the Attendant Extension.
Note: Only valid extension directory numbers can be assigned as tenant group attendants. Extensions
that are programmed as Attendant for another Tenant Group or Alternate Attendant cannot be
programmed as the attendant.)
• Press [save
savesave
save].
Program Alternate Attendant Extension
• Return to the Database Item Select screen by pressing the Volume button (up or down).
• Enter 04-02-1-06 to program the attendant extension for Tenant Group 1. (04-02-2-06 for Tenant 2 Group;
04-02-3-06 for Tenant Group 3.)
• Press [
save
savesave
save].
• To change the designated attendant extension press [chg
chgchg
chg] (change).
• Enter the extension number to be assigned as the Attendant Extension.