Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-11
6. Dial 1 - 99 to set the maximum seconds allowed to record the specific greeting/message. (Keep in mind that
the maximum length of auto-attendant greeting/messages is 120 seconds.)
7. Press [
save
savesave
save]. The new maximum record time for this greeting/message is now stored.
8. Press [play
playplay
play] to hear the current greeting/message.
9. Press the
Hold button to return to the previous Admin. level.
10. Press [
record
recordrecord
record] to record this greeting/message.
11. Press [
stop
stopstop
stop] to end recording.
12. Continue this process for each Automated Attendant greeting/message.
13. When finished recording greetings/messages, exit Admin. by pressing the On/Off button twice. Or return to
the previous Admin. level by pressing the
Hold button.
14. Press [next
nextnext
next]. The Admin. item Temporary Mode displays.
To change Temporary Mode:
Note: Temporary Mode is available for special circumstances that may arise such as holidays and bad
weather days so that callers can be informed of unusual business hours adjustments. While active,
Temporary Mode “Y” plays the Temporary Greeting in place of the “DAY,” “ALT” and “EVE” Greeting.
1. Press [
chg
chgchg
chg]. Temporary Mode is toggled On/Off each time [chg
chgchg
chg] is pressed.
2. Press [next
nextnext
next]. The Admin. item System Speed Number displays.
To change System Speed Numbers:
1. Press [show
showshow
show]
2. Dial a valid System Speed Dial directory number (500-699).
3. Press [
show
showshow
show] to view the current System Speed Dial number. Display will read "EMPTY" if no number is
currently programmed.
4. Press [
chg
chgchg
chg] to change the current number.
5. Dial the telephone number to store in this speed dial directory number.
6. Press [
save
savesave
save]
7. Press [
next
nextnext
next] or [back
backback
back] to return to additional System Speed Number programming.
8. When finished making changes, exit Admin. by pressing the
On/Off button twice. Or return to the previous
Admin. level by pressing the
Hold button.
9. Press [next
nextnext
next]. The Admin. item “Forward Auxiliary Lamp” displays.
To enable/disable the Call Forward indication of the Auxiliary Lamp for a particular extension:
Note: Extensions that use Call Forward frequently may not wish to have their Auxiliary Lamp indicate the
status of Call Forward “Active.” Therefore the attendant has the ability to disable this function of the
Auxiliary lamp.
1. Press [
show
showshow
show].
2. Dial the directory number for the extension to be programmed.
3. Press [
show
showshow
show].
4. Toggle [chg
chgchg
chg] to turn on and off the Auxiliary Lamp/Status bar functionality for Call Forward status of that
extension. "Y" = yes, "N" = no.
5. Press [
back
backback
back] or [next
nextnext
next] to program another extension.