Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-9
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are interactive LCD button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!#* and then enter the DB Admin password
“
########.” (Note: This eight-character can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input 03-34.
• Press [
save
savesave
save]. This advances to the VM Monitor_T screen.
• Press [chg
chgchg
chg] (change) until the appropriate VM Monitor Time displays (in seconds.)
• Press [back
backback
back] or [next
nextnext
next] for other programming. Or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu.
• Use
¢£¤¥ to highlight “CALL HANDLING” and then press «.
• Use
¢£¤¥ to highlight “Category 3, then press «. The cursor is now positioned on the database
item - “Dial Delay Time.”
• Use
¢£¤¥ to highlight “VM Monitor Time” and then press « until you reach the appropriate play
time. (Range is 10-60 seconds.)
• When you have completed all changes, press the ° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Attendant Administration (Admin.) !-0
Attendant Administration (Admin.) is used to set or modify the features; Service Mode (Day/Alt/Eve/Time), Auto
Attendant Messages (optional Auto Attendant Module required), Temporary Mode, System Speed Dial and FWD
AUXI LAMP. Attendant Administration (Admin.) can be performed at any user extension, but the assigned Attendant
Extension user password is required.