Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 4-1
┌───────────────────────────────── DX80 PC-DBA ────────────────────────────────┐
│ [Cnt] KSU Revision : K16UM0.F19 Date: 01/02/14 │
│ Time: 20:55:05 │
│ Maintenance - SW/HW Revision : │
│ │
│ BOARD POS SW Revision HW Revision │
│ CPM BOARD K16UM0.F19 NULL │
│ 8VM CARD POMVM0.F01 NULL │
│ MDM CARD NULL NULL │
│ DPM BOARD 1/01 PEDUM0.F09 NULL │
│ OPEN 1/02 NULL NULL │
│ OPEN 1/03 NULL NULL │
│ APM4 BOARD 1/04 PEAUM0.F09 NULL │
│ OPEN 2/01 NULL NULL │
│ OPEN 2/02 NULL NULL │
│ OPEN 2/03 NULL NULL │
│ OPEN 2/04 NULL NULL │
│ COM BOARD 1/1&5 PTLUM0.F09 NULL │
│ OPEN 2/1&5 NULL NULL │
│ │
│ │
│ │
└─────────────────────────────────── R16UM0.F21 ───────────────────────────────┘
Event
The Event tracking operation can be invoked to record system actions processed for the purposes of
debugging the system. This operation is rarely required and usually invoked following a request by the
customer service department to do so.
Event tracking can be started by a specified system operation and programmed to end output of processed
data by a specific system operation or never to end until manually forced to discontinue. To start event
tracking use Event Invoking and select one of the available system operations that will cause event data
output to begin. (Do not select “Pseudo” to begin event tracking. This operation is a non-occurring event
intended for use with “End Event” when the event output should not end by a system operation.)