Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 4-18
┌───────────────────────────────── DX80 PC-DBA ────────────────────────────────┐
│ [Cnt] KSU Revision : K16UM0.F19 Date: 01/02/14 │
│ Time: 20:43:58 │
│ Diagnostics : │
│ │
│ BOARD TYPE RESULT │
│ COMMON CTRL BOARD CPM BOARD PASSED │
│ OPTION BOARD 8 VOICE MAIL BOARD CONNECT │
│ MODEM BOARD MDM BOARD TESTING │
│ Cabinet 1 │
│ Cabinet 2 │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└─────────────────────────────────── R16UM0.F21 ───────────────────────────────┘
┌───────────────────────────────── DX80 PC-DBA ────────────────────────────────┐
│ [Cnt] KSU Revision : K16UM0.F19 Date: 01/02/14 │
│ Time: 20:44:35 │
│ Diagnostics - CPM BOARD : PASSED │
│ │
│ RS232-1 :PASSED │
│ │
│ │
│ RS232-2 :PASSED │
│ │
│ │
│ ROM CHECK : PASSED │
│ │
│ │
│ RAM CHECK : PASSED │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└─────────────────────────────────── R16UM0.F21 ───────────────────────────────┘
Notes:
This is an overview screen of test results.
• At the time this report was taken the Modem Module (MDM) was in the
testing state.
• Notice that the PC-8 Module reports “CONNECT.” Since the PC-8 is its own
self-contained system that runs independently of the DX-80 processor,
“CONNECT” and “DISCONNECT” are the only conditions reported for this
module.
• Move the cursor to any board/Cabinet and press « to get details of that
board.
Note:
Detail of CPM Board