Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 4-16
The following display shows the COM4 Board of Cabinet 1:
┌───────────────────────────────── DX80 PC-DBA ────────────────────────────────┐
│ [Cnt] KSU Revision : K16UM0.F19 Date: 01/02/14 │
│ Time: 20:41:18 │
│ Configuration : │
│ Board Type : COM4 BOARD Cabinet 1 │
│ │
│ TRK POS TYPE STATUS │
│ 1/05/01 CO OPEN │
│ 1/05/02 CO OPEN │
│ 1/05/03 CO OPEN │
│ 1/05/04 CO OPEN │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└─────────────────────────────────── R16UM0.F21 ───────────────────────────────┘
The following is a display of Cabinet 2:
┌───────────────────────────────── DX80 PC-DBA ────────────────────────────────┐
│ [Cnt] KSU Revision : K16UM0.F19 Date: 01/02/14 │
│ Time: 20:42:16 │
│ Configuration - Board Status Cabinet 2 │
│ │
│ BOARD TYPE STATUS │
│ BOARD 1 OPEN OPEN │
│ BOARD 2 OPEN OPEN │
│ BOARD 3 OPEN OPEN │
│ BOARD 4 OPEN OPEN │
│ BOARD 5 OPEN OPEN │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└─────────────────────────────────── R16UM0.F21 ───────────────────────────────┘
Diagnostics
The Diagnostics function can be invoked to force a diagnostic test operation. The system performs this test
automatically at the time it boots up (initial installation) and whenever programmed to do so. (See Database
Administration – via PC-DBA – System Application – Category 1 – Self-Test Time.) At default (factory
settings), the system Self-Test Time is set to “NULL” (never performed).
The Diagnostic Self-Test can be invoked Automatically (as above) or Manually.
When the Diagnostic Self-Test is invoked, the DX-80 will perform a list of software and hardware checks to
assure proper operation of the hardware installed.