Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 4-9
F1 – Help
Press F1 to view the keystroke help menu of PC-DBA. There are two help screens.
F2 – A-Save/U-Save
This is a function of PC-DBA – Programming only and is described in Database Administration – Via PC-
DBA.
F3 – Receive
This is a function of PC-DBA – Programming only and is described in Database Administration – Via PC-
DBA.
F4 – Send
This is a function of PC-DBA – Programming only and is described in Database Administration – Via PC-
DBA.
F5 – Connect
Connecting to the DX-80 processor
Once a physical connection (cable or modem) has been made between the PC and the DX-80 system. You
must link the two devices using the F5-Connect function.
Press F5. If an adequate connection (straight-through serial cable or modem connection) exists between
the DX-80 system and the PC you will see the following Connect prompt:
┌────────────────────────────┐
│ Connect │
├────────────────────────────┤
│ Please Input KSU Password: │
│ ________ │
└────────────────────────────┘
Input the Database Administration Password. (At default this password is “_ _ _ _ _ _ _ _” (8 spaces). Press
the space bar eight times. When all eight password characters are input correctly, the connection process
will begin. If unsuccessful (wrong password or poor connection), the following error screen will appear:
┌────────────────────────────┐
│ Connect │
├────────────────────────────┤
│ Failure │
│ Press Any Key │
└────────────────────────────┘
If successful, confirmation is given via the following screen:
┌────────────────────────────┐
│ Connect │
├────────────────────────────┤
│ Succeed │
│ Press Any Key │
└────────────────────────────┘
Press any key to return to the PC-DBA Maintenance screens.
When a successful connection has been established between the DX-80 processor and the PC PC-DBA
software the following icon is displayed in the upper left corner of the PC-DBA screen.
[Cnt]