Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-260
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
06-02-1~3-01 (Voice Mail Hunt Group, where 1~3 is the Tenant Group {usually “1”})
• Press [
save
savesave
save]. This advances to Voice Mail Table for Tenant 1 – Hunt Group.
• Press [chg
chgchg
chg] until the UCD Group to be used as the VM Hunt Group displays. (New UCD Group
selected and programmed with digital channel Members.)
• Press [
next
nextnext
next] to continue programming the various call handling digits (Prefix/Suffix).
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
Program UCD Group and Members:
• Use
¢£¤¥ to highlight “Extension Application.” Then press «.
• Use
¢£¤¥ to highlight “Uniform Call Distribution.” Then press «.
• Input the UCD Group to program as the VM Hunt Group (usually 24). Then press «.
• Use
¢£¤¥ and ³´ to highlight “Members.” Then press «.
• Use ¢£¤¥ and ³´ to highlight the member to program. Then press «.
• Input the digital channel directory number as this member of the VM UCD Group. Then press
«.
• Continue until all digital channels are programmed.
• When all changes are made press the
° (escape) key to exit this database programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
Program Voice Mail Hunt Group:
• Use
¢£¤¥ to highlight “Extension Application.” Then press «.
• Use ¢£¤¥ to highlight “Voice Mail Table.” Then press «.
• Use
¢£¤¥ to highlight the Tenant Group to program (usually “1”). Then press «.
• Press « until the selected UCD Group number displays (usually 24).