Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-259
3. The call is routed to the mailbox entered in a record mode so that the caller can leave a message for the
mailbox user.
Operation – Retrieving Messages from Your Voice Mailbox
1. When messages are waiting in your voice mailbox, the display will indicate that messages are waiting and
advise you of the number of new messages.
2. Press the center LCD Interactive button. (Or dial the voice mail code !64.) A connection is
established and your voice mailbox will prompt you.
3. Use the voice mail user guide and audio prompts to retrieve messages and invoke other mailbox operations.
4. Hang-up to complete the call. (The DX-80 system will close your voice mailbox.)
Conditions
a) When transferring a call to voice mail, you may choose to enter no mailbox number. Doing so, will route the
caller to the voice mail main greeting (e.g., Auto Attendant greeting.)
b) If no voice mail channels are available at the time you place your call into voice mail, you will hear ring-back
tone until a port is available.
c) Heavy voice channel use can impact message indication updates.
d) When VM messages are waiting, the Auxiliary Lamp will flash green.
e) The voice mail code
!64 can be programmed on any available Flexible Feature Button.
f) When the voice mail code is programmed on a Feature Button, the associated LED will flash red when VM
messages are waiting.
g) The voice mail UCD Group directory number (usually
433) can be programmed on any available
Flexible Feature Button.
Programming Abstract
• Change the UCD Group used as the voice mail Group if necessary.
• Change the Voice Mail Table reference of UCD Group if necessary.
• To activate Automated Attendant, set Answering Position to the UCD Group directory number coinciding
with voice mail. (Usually “433” {UCD Group 24}.) See CO Line Ring Assignment.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input the code to go to the specific database item to change per the list:
06-01-01~24-03-01 (UCD Group “Members” where 01~24 is the group number.)
• Press [
save
savesave
save]. This advances to Member #1 of the new UCD Group selected.
• Press [chg
chgchg
chg].
• Input the extension directory of the digital channel to program into this Member. (At default the digital
channels of DX-80 Voice are 157, 158, 159, 160, 161, 162, 163, 164.)
• Press [
save
savesave
save].
• Press [
next
nextnext
next].
• Continue from [
chg
chgchg
chg] above to program all Voice Mail channels as members of this UCD Group.