Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-257
• Use
¢£¤¥ to highlight the Tenant Group to program (usually “1”). Then press «.
• Press « until the selected UCD Group number displays (usually 24).
• Use
¢£¤¥ to highlight the various call handling digit parameter to program. Then press «.
• Input the digit string for the selected call type. Then press «.
• Continue until all programming is complete.
• When all changes are made press the
° (escape) key to exit this database programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
Program Voice Mail Dialing Ratio:
• Use ¢£¤¥ to highlight “Call Handling.” Then press «.
• Use
¢£¤¥ to highlight “Category 3.” Then press «.
• Use ¢£¤¥ to highlight VM Dialing Ratio – Tone Time or Inter-Digit Time. Then press «.
• Press
« until the required time displays.
• When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Voice Mail – Digital Integration (optional) !64
The DX-80 system may be equipped with the optional DX-80 Voice – voice mail system. This voice processing
solution is fully integrated with the DX-80 system. Performance of the digitally integrated DX-80 Voice is notably
superior to that of a regular analog integration. When DX-80 Voice is added to the DX-80 system, the digital interface
has the advantage of adding up to eight ports of voice mail while maintaining a maximum system configuration of 16
CO Line ports, 48 Digital Telephone ports, and 8 Analog device ports. With DX-80 Voice there is no port loss.
The DX-80 digital integration also eases installation effort by automating setup of the three primary functions users
wish to deploy in a voice processing system; Voice Messaging, Automated Attendant, and Menu Routing. Just install