Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-256
Program Extension Port Type:
• Use
¢£¤¥ to highlight “Extension.” Then press «.
• Use ¢£¤¥ to highlight “Category 2.” Then press «.
• Use
¢£¤¥ and ³´ to highlight “Port Type” for the analog extension connected to VM.
• Press « until Port Type “VM” displays.
• Use
¢£¤¥ and ³´ to highlight “Port Type” for the next analog extension to program.
• Press « until Port Type “VM” displays.
• Continue until all analog extensions connected to VM are programmed.
• When all changes are made press the
° (escape) key to exit this database programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
Program UCD Group Members:
• Use
¢£¤¥ to highlight “Extension Application.” Then press «.
• Use
¢£¤¥ to highlight “Uniform Call Distribution.” Then press «.
• Input the UCD Group to program as the VM Hunt Group (usually 24). Then press «.
• Use
¢£¤¥ and ³´ to highlight “Members.” Then press «.
• Use ¢£¤¥ and ³´ to highlight the member to program. Then press «.
• Input the extension number of the analog port to program as this member of the VM UCD Group. Then
press
«.
• Continue until all analog extensions connected to VM are programmed.
• When all changes are made press the
° (escape) key to exit this database programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
Program Voice Mail Hunt Group and Call Handling digits:
• Use ¢£¤¥ to highlight “Extension Application.” Then press «.
• Use ¢£¤¥ to highlight “Voice Mail Table.” Then press «.