Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-252
• Program the various Voice Mail call handling control digits into the voice mail table. (The DX-80 allows for
specific control handling for various call types. For example, calls that recall to VM can be handled in a
unique manner.)
Note: This programming must coincide with the programming of the ancillary voice mail device for the
various functions to operate. Ancillary voice mail programming is outside the scope of this manual.
• Set the Voice Mail Dialing Ratio for suitable DTMF operation. (If required.)
• To activate Automated Attendant, set Answering Position to the UCD Group directory number coinciding
with voice mail. (Usually “433” {UCD Group 24}.) See CO Line Ring Assignment.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input the code to go to the specific database item to change per the list:
01-101~156-21 (Extension “Port Type” where 101~156 is the analog port)
• Press [
save
savesave
save]
• Press [chg
chgchg
chg] until the port type “VM” displays for this extension.
• Press the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
06-01-01~24-03-01 (UCD Group “Members” where 01~24 is the group number.)
• Press [
save
savesave
save]. This advances to Member #1 of the UCD Group selected.
• Press [chg
chgchg
chg].
• Input the extension directory of the analog port to program into this Member.
• Press [save
savesave
save].
• Press [
next
nextnext
next].
• Continue from [
chg
chgchg
chg] above to program all Voice Mail ports as member of this UCD Group.
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
06-02-1~3-01 (Voice Mail Hunt Group, where 1~3 is the Tenant Group {usually “1”})
• Press [
save
savesave
save]. This advances to Voice Mail Table for Tenant 1 – Hunt Group.
• Press [chg
chgchg
chg] until the UCD Group to be used as the VM Hunt Group displays. (UCD Group where all of
the VM type analog ports are programmed as Members.)
• Press [
next
nextnext
next] to continue programming the various call handling digits (Prefix/Suffix).
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
06-02-1~3-02-01 (VM Table – Prefix Table – ICM/VM, where 1~3 = Tenant Group)
• Press [
save
savesave
save].
• Press [
chg
chgchg
chg].
• Input the required digits to identify this call as originated at the subscriber phone.