Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-246
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program analog extension port as Type “V.A.”:
• Input 01-nnn-21, then press [
save
savesave
save]. (Where “nnn” is the extension number of the analog port connected
to an ancillary RAD Device.) This advances to the selected extension Port Type database item.
• Press [
chg
chgchg
chg] until the appropriate port type displays.
• Press
the Hold button to return to the previous menu level or press the Volume button (up or
down)
to return to the DB Item Selection screen or exit programming.
• Continue programming analog extensions as port type “V.A.” as required.
• Press
the Hold button to return to the previous menu level or press the Volume button(up or down)
to return to the DB Item Selection screen or exit programming.
Program the Voice Announcer UCD Group:
• Input 06-01-01~24-02, then press [
save
savesave
save]. This advances to the selected UCD Group (01~24) Attribute
database item.
• Press [chg
chgchg
chg] until the appropriate attribute (V.A.) displays.
• Press [next
nextnext
next]. This advances to the Member database item for this UCD Group.
• Press [show
showshow
show]. This advances to the first (of twenty-four) Member of this UCD Group.
• Use [back
backback
back] and [next] to select the UCD Group Member for programming.
• Press [chg
chgchg
chg].
• Input the extension directory number of the analog extension to assign as this V.A. UCD Group
Member.
• Press [
save
savesave
save].
• Repeat from [next
nextnext
next], [back
backback
back] for additional Members.
• Press
the Hold button when finished entering members.
• Press
the Hold button to return to the previous menu level or press the Volume button (up or
down)
to return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.