Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-242
• Use
¢£¤¥ to highlight “Hunting Method.”
• Press
« to select the appropriate Hunting Method for this UCD Group.
• Use
¢£¤¥ to highlight “No Answer Timer.”
• Press
«.
• Input the appropriate No Answer Timer for this UCD Group. Then press
«.
• Use
¢£¤¥ to highlight “Overflow 1 Timer.”
• Press «.
• Input the appropriate Overflow 1 Timer for this UCD Group. Then press «.
• Use
¢£¤¥ to highlight “Overflow 1 Dest.”
• Press
«.
• Input the appropriate Overflow 1 Destination for this UCD Group. Then press «.
• Use
¢£¤¥ to highlight “Overflow 2 Timer.”
• Press
«.
• Input the appropriate Overflow 2 Timer for this UCD Group. Then press
«.
• Use
¢£¤¥ to highlight “Overflow 2 Dest.”
• Press «.
• Input the appropriate Overflow 2 Destination for this UCD Group. Then press «.
• Use
¢£¤¥ to highlight “Overflow Count.”
• Press
«.
• Input the number of times that Overflow 2 Destination should be played (RAD) for this UCD Group.
Then press
«.
• Use
¢£¤¥ to highlight “Re_Route Dest.”
• Press
«.
• Input the appropriate Reroute Destination for this UCD Group. Then press
«.
• Press ° to go to the previous menu level and program another UCD Group as above.
• Continue making programming changes as required.
• When all changes are made press the
° (escape) key to exit this database-programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function has
been performed. Please refer to the Programming section of this manual to learn more about this procedure.