Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-241
• Press [
save
savesave
save].
• Press [next
nextnext
next].
• 06-01-01~24-10 (UCD Group select Overflow Count)
• Press [
chg
chgchg
chg].
• Input appropriate Overflow Count.
• Press [save
savesave
save].
• Press [next
nextnext
next].
• 06-01-01~24-11 (UCD Group input Reroute Destination)
• Press [chg
chgchg
chg].
• Input appropriate Reroute Destination.
• Press [save
savesave
save].
• Press [
next
nextnext
next].
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “Extension Application” and then press «.
• Use ¢£¤¥ to highlight “Uniform Call Distribution” and then press «.
• Input the UCD Group to program 1-24. Then press
«.
• Use
¢£¤¥ to highlight “Attribute.”
• Press
« to select the appropriate attribute for this UCD Group.
• Use
¢£¤¥ to highlight “Tenant Group.”
• Press
« to select the appropriate tenant group for this UCD Group.
• Use
¢£¤¥ to highlight “Name.”
• Press «.
• Input the name for this UCD Group. Then press
«.
• Use
¢£¤¥ to highlight “Member.”
• Press
«.
• Use
¢£¤¥ to highlight “MemX” (the Member to program). Then press «.
• Input the extension number for this Member. Then press
«.
• Repeat from use
¢£¤¥ to highlight “MemX” for all member to be programmed.
• When finished programming members, press
°.
• When prompted to “Exit this Feature,” press “Y” (yes).