Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-239
Default Setting
CO Line – Answering Position = no UCD Groups are assigned for CO Line ringing.
System Application – Numbering Plan - Ext Hunt Group
Extension Application – UCD – Attribute = UCD (Range is: UCD/V.A.)
Extension Application – UCD – Tenant Group = 1 (Range is: 1~3.)
Extension Application – UCD – Name = NULL (Range is: 7 characters)
Extension Application – UCD – Member 1~24 = NULL (Range is: any extension number)
Extension Application – UCD – Hunting Method = Linear
(Range is: Linear/All Ring/Distributed.)
Extension Application – UCD – No Answer Timer = 10 (Range is: 5~60 sec.)
Extension Application – UCD – Overflow 1 Timer = 0 (Range is: 0~255.)
Extension Application – UCD – Overflow 1 Destination = NULL
(Range is: UCD Group or extension directory number.)
Extension Application – UCD – Overflow 2 Timer = 0 (Range is: 0~255.)
Extension Application – UCD – Overflow 2 Destination = NULL
(Range is: UCD Group or extension directory number.)
Extension Application – UCD – Overflow Count = 1 (Range is: 1~128.)
Extension Application – UCD – Reroute Destination = NULL
(Range is: UCD Group or extension directory number.)
Programming Abstract
• See CO Line Ringing Assignment to program a UCD Group number as a CO Line Answering Position.
• See Flexible Numbering Plan to program changes to the directory numbers used to access UCD Groups.
• Program extensions into UCD Groups as required.
• Program UCD Group call handling required via Overflow and Reroute functions.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input the code to go to the specific database item to change per the list:
• 06-01-01~24 (UCD Group)
• Press [
save
savesave
save]
• 06-01-01~24-01 (UCD Group select Tenant number)
• Press [
chg
chgchg
chg] to select the Tenant number to which this UCD Group is to be associated.
• Press [next
nextnext
next].
• 06-01-01~24-02 (UCD Group select Attribute)
• Press [chg
chgchg
chg] to select the Attribute for this UCD Group.
• Press [
next
nextnext
next].
• 06-01-01~24-03 (UCD Group select Member(s))
• Press [
show
showshow
show].
• Press [
next
nextnext
next], [back
backback
back] to choose the Member to program.
• Press [
chg
chgchg
chg].
• Input the extension directory number of the extension to assign as a Member.