Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-236
Or…
• Input 03-11, then press [
save
savesave
save]. This advances to the Transfer-Busy Recall programming screen.
• Press [chg
chgchg
chg] until the appropriate value for this data item displays.
• Press [next
nextnext
next] to advance to the next data item or exit programming.
• Press
the Hold button to exit DISA programming and return to the previous menu level.
• Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
Program extensions into the tenant group:
• Use
¢£¤¥ to highlight “Call Handling” and then press «.
• Use
¢£¤¥ to highlight “Category 1” and then press «.
• Use ¢£¤¥ to highlight “XFR_I Recall” or “XFR_B Recall” as necessary for change.
• Press
« until the appropriate value displays.
• When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Transfer and Answer Call !68
Transfer and Answer is a convenience feature that speeds the process of completing a transfer and answering a
ringing call by making the operation possible by one button. (This feature must be used from a feature button that has
been designated for the purpose.)
When a busy extension user (secretary or attendant) is in the process of transferring a call and another call rings in,
the Transfer/Answer button can be pressed to complete the transfer and answer the ringing call at the same time.
Related Features
Transfer Flexible Feature Button Programming