Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-233
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program Pulse Dialing Break Time:
• Input 03-05, then press [
save
savesave
save]. This advances to Dialing Ratio.
• Press [show
showshow
show]. This advances to Break Time.
• Press [chg
chgchg
chg] to select the appropriate break time ratio (60/67).
• Press [next
nextnext
next] to advance to pulse dialing Inter-Digit Time.
• Press [chg
chgchg
chg] to select the Pulse Dialing Inter-Digit Time.
• Press [next
nextnext
next] to advance to Tone Time.
• Press [chg
chgchg
chg] to select the appropriate DTMF Tone Time (this time is also used for DTMF inter-digit timing).
• Press
the Hold button to return to the previous menu level or press the Volume button to return to the DB
Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use ¢£¤¥ to highlight “Call Handling” and then press «.
• Use
¢£¤¥ to highlight “Category 2” and then press «.
• Use ¢£¤¥ to highlight “Break Time,” “Inter-Digit” or “Tone Time.”
• Press
« until the appropriate value displays.
• When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function has
been performed. Please refer to the Programming section of this manual to learn more about this procedure.