Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-229
under the two conditions, Day and Evening mode. This allows each table entry to be assigned to each COS for CO
Lines and extensions differently for these modes of system operation.
A table entry may be as simple as “From 0,” “To 0.” The result of this truth table is that calls associated to this COS
are monitored for only the first digit dialed. If that digit is “0,” the call is allowed and no further restriction monitoring
takes place.
A table entry of From “1813412,” To “1813450” will cause calls with this associated COS to be monitored for the first
seven digits dialed or until the first digit inconsistent with this entry is dialed. A call dialed as 1813410 is denied when
the digit “0” is dialed. A call dialed as 1813419+any digits, is allowed.
Related Features
Class of Service – Extension Night Service Activate
Class of Service – CO Line DISA
Speed Dial – System Account Codes - Forced/Verified
Related Programming
Restriction – Toll Restriction – Digit Interval – From
Restriction – Toll Restriction – Digit Interval – To
Restriction – Toll Restriction – Digit Interval – Extension COS Day/Eve
Restriction – Toll Restriction – Digit Interval – CO Line COS Day/Eve
Restriction – Account Code Table (see Account Codes)
Extension - Day/Eve Class Of Service
CO Line Day/Eve Class Of Service
Call Handling - DISA
Default Settings
Restriction – Toll Restriction – Digit Interval 001 – From = “0.”
(Range is any digits, max. 10 in length.)
Restriction – Toll Restriction – Digit Interval 001 – To = “#.”
(Range is any digits, max. 10 in length.)
Restriction – Toll Restriction – Digit Interval 002~100 – From/To = “NULL” (none).
Restriction – Toll Restriction – Digit Interval – Extension/CO Line Day/Eve COS 0 = “Y.” (Range is Y/N.)
Restriction – Toll Restriction – Digit Interval 002~100 – Extension/CO Line Day/Eve COS 1-7 = “N.”
Extension - Day/Eve Class Of Service = “0.” (Range is 0~7.)
CO Line Day/Eve Class Of Service = “0.” (Range is 0~7.)
Conditions
a) Digit Interval 001 is programmed as: From “0,” To “#.” (This allows all digits to be dialed.)
b) There are one hundred (100) Interval Table entries available for programming.
c) System Speed can be set to Override toll restriction.
Programming Abstract
• Program Digit Intervals as required.
• Assign Digit Intervals to Extension/CO Line COS for Day and Eve modes as required.
• Assign Extension COS as required to follow the appropriate Digit Interval.
• Assign CO Line COS as required to follow the appropriate Digit Interval.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.