Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-226
c) There are three tenant groups maximum in the DX-80 system.
Default Setting
Extension – Tenant Group, all extensions are set to Tenant Group 1. (Range is 1~3.)
CO Line – Tenant Group, all CO Lines are assigned to Tenant Group 1. (Range is 1~3.)
Call Handling – Tenant Calling, All Tenant Groups are allowed to dial intercom directory numbers of
extensions in all other tenant groups. (Range is Y/N for each calling direction between tenant groups.)
Programming Abstract
• Program extensions for the tenant group.
• Program CO Lines for the tenant group.
• Program Tenant Group Calling is required.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program extensions into the tenant group:
• Input 01-101~156-02. Then press [
save
savesave
save]. This advances to the Tenant Group selection for the extension
selected.
• Press [
chg
chgchg
chg] until the appropriate tenant group for this extension displays.
• Press
the Hold button to enter a new extension to program.
Or…
• Use the [
back
backback
back] or [next
nextnext
next] button to skip to the appropriate database item.
Or…
• Press
the Volume button (up or down) to return to the DB Item Select screen.
Program CO Lines into the tenant group:
• Input 02-740~755-02. Then press [save
savesave
save]. This advances to the Tenant Group selection for the CO Line
selected.
• Press [
chg
chgchg
chg] until the appropriate tenant group for this CO Line displays.
• Press
the Hold button to enter a new CO Line to program.
Or…
• Use the [
back
backback
back] or [next
nextnext
next] button to skip to the appropriate database item.
Or…
• Press
the Volume button (up or down) to return to the DB Item Select screen.