Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-222
• Input 01-101~156-19, then press [
save
savesave
save]. This advances to the SMDR Output programming screen for the
extension selected.
• Press [
chg
chgchg
chg] to change this database item. Each time that [chg
chgchg
chg] is pressed the value changes.
• Press the Volume button (up or down) to return to the DB Item Select screen.
• To program the SMDR Call Output – Outgoing Call:
• Input 03-30-01, then press [
save
savesave
save]. This advances to the SMDR Output selection for Outgoing Calls.
• Press [
chg
chgchg
chg] to change this database item. Each time that [chg] is press the value is changed.
• Press [next
nextnext
next] to advance to SMDR Call Output – Incoming Call or press the Volume button (up or down) to
return to the DB Item Select screen.
• To program the SMDR Call Output – Incoming Call:
• Input 03-30-02, then press [save
savesave
save]. This advances to the SMDR Output selection for Incoming Calls.
• Press [chg
chgchg
chg] to change this database item. Each time that [chg
chgchg
chg] is press the value is changed.
• Press
the Hold button to exit this programming and return to the previous menu level or press the Volume
button (up or down) to return to the Database Item Select screen.
• To program the SMDR Call Output – Account Code:
• Input 03-30-03, then press [save
savesave
save]. This advances to the SMDR Output for Account Codes.
• Press [chg
chgchg
chg] to change this database item. Each time that [chg
chgchg
chg] is press the value is changed.
• Press
the Hold button to exit this programming and return to the previous menu level or press the Volume
button (up or down) to return to the Database Item Select screen.
• To program the (CIL) Call Information Log serial port baud rate (CIL X_RATE):
• Input 04-16, then press [
save
savesave
save]. This advances to the SMDR CIL port transmission rate setting.
• Press [chg
chgchg
chg] until the appropriate value displays.
• Press
the Hold button to exit this programming and return to the previous menu level or press the Volume
button (up or down) to return to the Database Item Select screen.
• Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory, then press Enter.
• Press any key at the program title page (as requested) to enter the Main Menu.
• Select PC-DBA from the Main Menu.
• Select “Programming” from the PC-DBA Menu. The Database Programming menu is now displayed.
• To program an extension for SMDR Output:
• Use the cursor positioning arrows to highlight “Extension” and then press Enter.
• Use the cursor arrows to highlight “Category 2” and then press Enter.
• Use the cursor arrows to highlight the database item “SMDR Output” for the Extension to be changed.
(Note: You may need to use the Page Up/Down keys to view the extension for which changes are
required.)
• Press Enter. Each time that enter is pressed the value of this database item is updated.
• When all changes are made press the ESC (escape) key to exit this database-programming screen.
You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
Ø Press “N” to abort changes and leave all data unchanged.
Ø Press “Y” to save changes.