Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-194
Conditions
A pause occupies one digit position when stored in speed dial.
Default Settings
Call Handling – PBX Auto Pause is set to “1.0” seconds. (Range is 0.5 – 7.0)
Call Handling – Pause Time is set to “2.0” seconds. (Range is 0.5 – 7.0)
Programming Abstract
• Program the Pause Insertion Time to adequately apply a pause time based on the host PBX requirements
for trunk calls. The time interval to be considered is from the time the trunk access code is dialed to the time
that trunk dial tone is heard. When Last Number Redial is used (at a DX-80 extension) on a “PBX” Type CO
Line circuit, an automatically inserted pause of this duration will be inserted between the PBX Code dialed
and the remaining digits to be re-dialed.
• Program the Pause Time for the anticipated requirement of pause time for speed dial numbers.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program Auto Pause Insertion Time (used with PBX Type CO Line ports).
• Input 03-15, then press [
save
savesave
save]. This advances to the PBX Auto Pause programming screen.
• Press [chg
chgchg
chg] until the appropriate PBX Auto Pause Time to displays.
Program Pause Time (used with speed dial).
• Input 03-04, then press [
save
savesave
save]. This advances to the Pause Time programming screen.
• Press [chg
chgchg
chg] until the appropriate Pause Time to displays.
• Press
the Hold button to return to the previous menu level or press the Volume button to return to the DB
Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “Call Handling” and then press «.
Program Auto Pause Insertion Time (used with PBX Type CO Line ports).
• Use ¢£¤¥ to highlight “Category 1” and then press «. The first (of 2) Call Handling – Category 1
screen displays.
• Use
¢£¤¥ to highlight PBX Auto Pause or Pause Time.
• Press
« until the appropriate time displays.