Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-193
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
Program External Pager to a Tenant Group and Paging Groups:
• Use
¢£¤¥ to highlight “System Resource” and then press «.
• Use
¢£¤¥ to highlight “External Pager” and then press «.
• Use ¢£¤¥ to highlight the Tenant Group or Paging Group that you wish to program.
• Then press
« until the appropriate value displays for these parameters.
• When all changes are made press the ° (escape) key to exit this database-programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Pause / Pause Insertion !70
Pause Insertion is used to generate an intentional delay in dialing on outgoing CO line calls. A pause or a
combination of pauses may be stored in the Speed Dial bins to allow timed access to special services, while allowing
you to monitor the progress of the call.
A pause will appear as “P” on a Digital Speakerphone display.
The system also supports Automatic Pause Insertion. This function monitors digits dialed on “PBX” Type CO Lines for
PBX Codes entered. When a PBX Code is recognized, the system automatically inserts a pause between that digit
and the remaining digits for Last Number Redial system features.
Related Features
Automatic Busy Redial Saved Number Redial
Last Number Redial Speed Dial - Extension, System
Memo Pad PBX Compatibility
Related Programming
CO Line - CO Line Type
Call Handling - Pause Time, PBX Auto Pause
System Resource - Speed Number Programming
Operation
When storing numbers in speed dial use the feature code !70 to insert a pause.