Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-182
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “System Application” and then press «.
• Use ¢£¤¥ to highlight “System Resource” and then press «.
• Use
¢£¤¥ to highlight “Preprogrammed Message” and then press «.
• Use
¢£¤¥ to highlight the message to be changed. Then press «.
• Input the message and then press « to temporarily store this data.
• Continue making other programming changes as required.
• When all changes are made press the
° (escape) key to exit this database-programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Modem (Optional MDM)
The DX-80 system can be equipped with an optional internal modem for DX-80 Remote PC-DBA Programming
support. When equipped, the Modem Module provides a dedicated communications path between the system
processor and PC-DBA. This communications path does not require use of analog port system resources.
Related Features
Database Administration via PC-DBA
Related Programming
System Resource - Modem and Serial Port
Conditions
Modem speeds are 1200 bps/ 2400 bps.
Default Settings
System Resource – Built-in Modem – DIR. No. (directory number) is set to “199.”
System Resource – Built-in Modem – Baud Rate is set to “2400.”