Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-181
Operation – Deactivate
1. The extension must be idle.
2. Press
!*90. The display shows:
STATUS MSG DEL
3. The telephone returns to idle.
Conditions
a) Dial Pad Key 1 is used to select special characters. Refer to the Letter Scheme feature
b) Dial
* before any dial pad key to insert the numeral on the dial pad key instead of a letter in this character
position.
c) When
* is pressed after a letter has been selected for this character position, the selected letter is forced
to lower case.
d) Use
/ to insert a space.
e) Use
/ to advance to the next character position.
f) Messages can be 16 letters/symbols maximum.
g) The Message – Status feature code can be stored on an available Flexible Feature Button.
h) When the Message – Status feature code is stored on a Flexible Feature Button, that button is used to
activate and deactivate the status message.
Default Settings
System Resource – Preprogrammed Message – Premises Message 1 = “Out to lunch”
System Resource – Preprogrammed Message – Premises Message 2 = “Will return soon”
System Resource – Preprogrammed Message – Premises Message 3 = “Gone for the day”
System Resource – Preprogrammed Message – Premises Message 4 = “In a meeting”
System Resource – Preprogrammed Message – Premises Message 5 = “Out of office”
System Resource – Preprogrammed Message – Premises Message 6 = “On vacation”
Programming Abstract
Change the content of preprogrammed messages as necessary.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input 04-07-02-01, then press [
save
savesave
save]. This advances to Preprogrammed Messages – Premises (Status)
Message – 1.
• Press [
next
nextnext
next] (if necessary) to advance to the next preprogrammed message to change.
• Press [
chg
chgchg
chg] to input a new message for the selected preprogrammed message.
• Use the chart and the dial pad keys to input the new message. When finished press [save
savesave
save].
• Continue programming messages as required.
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.