Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-180
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Messaging – Status Text !90
Each digital telephone may invoke an extension status display message to inform other users of the current status of
the extension/user. There are six programmed messages that may be used and one user-customizable message.
Whenever another digital speakerphone calls the extension with this Status message active, the message displays at
the calling extension.
Operation – Setup
1. The extension must be idle.
2. Press
!90. The display shows the first message choice (customizable):
EMPTY
store next chg
3. To input a custom message:
Press [chg
chgchg
chg], then use the alpha-numeric chart and dial-pad to write the message.
Press [save
savesave
save].
Otherwise, press [next
nextnext
next] until the appropriate pre-programmed message to displayed.
4. To activate the message for status indication, press [
store
storestore
store].
Number + * = lower case letter