Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-179
Default Setting
System Resource – Preprogrammed Message – Outgoing Message 1 = “Call Operator”
System Resource – Preprogrammed Message – Outgoing Message 2 = “Call Home”
System Resource – Preprogrammed Message – Outgoing Message 3 = “Call School”
System Resource – Preprogrammed Message – Outgoing Message 4 = “Visitor Waiting”
System Resource – Preprogrammed Message – Outgoing Message 5 = “Urgent”
System Resource – Preprogrammed Message – Outgoing Message 6 = “Come See Me”
Programming Abstract
Change the content of the preprogrammed messages as necessary.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input 04-07-01-01, then press [save
savesave
save]. This advances to Preprogrammed Messages – Outgoing (Text)
Message – 1.
• Press [
next
nextnext
next] (if necessary) to advance to the next preprogrammed message to change.
• Press [chg
chgchg
chg] to input a new message for the selected preprogrammed message.
• Use the chart and the dial pad keys to input the new message. When finished press [save
savesave
save].
• Continue programming messages as required.
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “System Application” and then press «.
• Use
¢£¤¥ to highlight “System Resource” and then press «.
• Use
¢£¤¥ to highlight “Preprogrammed Message” and then press «.
• Use
¢£¤¥ to highlight the message to be changed. Then press «.
• Input the message and then press « to temporarily store this data.
• Continue making other programming changes as required.
• When all changes are made press the
° (escape) key to exit this database-programming screen. You will
see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.