Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-166
Hour Mode Selection (12/24)
Standard 12-hour time or 24-hour time mode can be selected for common display at all Digital Speakerphones.
Related Features
Attendant Administration Alarm Clock - Extension
System Time/Date Alarm Clock System
SMDR CO Line Ringing Modes
Related Programming
System Application – Hour Mode
System Application – System Time
Conditions
a) When programming time related features, 24-hour format is used for input.
b) SMDR output is in 24-hour format regardless of the settings of Hour Mode.
c) The correct system time is entered in database programming along with the Hour Mode Selection, from any
Digital Speakerphone extension using the database-programming password.
d) The “AM” and “PM” indications are not displayed.
Default Settings
System Application – Hour Mode is set at “12” seconds. (Range is: 12/24.)
System Application – System Time
Programming Abstract
• Program the appropriate Hour Mode.
• Reference System Time and Date for setting system time.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input 08-03, then press [
save
savesave
save]. This advances to Hour Mode programming.
• Press [chg
chgchg
chg] until the appropriate hour format displays.
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “System Application.” Then press «.