Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-156
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “Call Handling.” Then press «.
• Use ¢£¤¥ to highlight “Category 1.” Then press «.
• Use
¢£¤¥ to highlight the database item “Hold Reminder” to change the interval of this tone
reminder.
• Press
«. Each time that enter is pressed the value of this database item is updated.
• Use
¢£¤¥ to highlight the database item “Hold Recall – SLT” to change the time that calls placed on
hold at analog devices remain on hold before ringing-back to the extension that placed them on hold.
• Press
«. Each time that enter is pressed the value of this database item is updated.
• Use ¢£¤¥ to highlight the database item “Hold Recall – DEKT” to change the time that calls placed
on hold at Digital Speakerphones remain on hold before ringing-back to the extension that placed them on
hold.
• Press
«. Each time that enter is pressed the value of this database item is updated.
• Continue making other programming changes as required.
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Hold – Exclusive !
When using the feature button and the hold button together, you may place an outside call on private/exclusive hold.
The held line will appear in use at other extensions.
Related Features
Hold Reminder Hold - System
Hold - Common (System) Call Handling - Hold Reminder
Related Programming
Call Handling - Ex_Hold Time, Hold Recall, Hold Reminder