Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-155
3. To retrieve a call on hold, press {FLASH} (hook-switch flash).
Conditions
a) Pressing Hold will place a conference on Exclusive Hold if you are the controlling party and you temporarily
exit to add another party.
b) When a conference call is placed on Hold, the steady lamp indication at the other extension(s) remains
steady (follows Exclusive Hold functions).
c) Any party who is placed on Hold will hear music only if available through the external music source
connection.
d) Calls placed on Exclusive (private) Hold, which have exceeded the Exclusive Hold programmed time, and
calls recalling from a CO line transfer, will be placed on System Hold automatically.
e) There is a distinctive flash rate for a CO line that is on System Hold.
Default Settings
Call Handling – Hold Reminder is set at “60” seconds.
(Range is: 0-90 seconds, “0” disables the Hold Reminder function.)
Call Handling – SLT Hold Recall is set at “0.5” minutes. (Range is 0-5.0 minutes.)
Call Handling – EKT Hold Recall is set at “0.5” minutes. (Range is 0-5.0 minutes.)
Programming Abstract
• Program the Hold Reminder Time.
• Program the Single Line Telephone Hold Recall Time.
• Program the Digital Extension
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program Hold Reminder:
• Input 03-04, then press [
save
savesave
save]. This advances to Hold Reminder programming.
• Press [
chg
chgchg
chg] until the appropriate Hold Reminder Time displays.
• Press
the Volume button (up or down) to return to the DB Select screen.
Program SLT Hold Recall:
• Input 03-12, then press [
save
savesave
save]. This advances to SLT Hold Recall programming.
• Press [chg
chgchg
chg] until the appropriate SLT Hold Recall time displays.
• Press
the Volume button (up or down) to return to the DB Select screen.
Program Executive (Display) Speakerphone Hold Recall:
• Input 03-13, then press [
save
savesave
save]. This advances to EKT Hold Recall programming.
• Press [
chg
chgchg
chg] until the appropriate SLT Hold Recall time displays.
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.