Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-142
• Input 03-02, then press [
save
savesave
save]. This advances to CO FLASH programming.
• Press [chg
chgchg
chg] until the appropriate CO Line hook-flash timing displays.
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “Call Handling.” Then press «.
• Use
¢£¤¥ to highlight “Category 1.” Then press «.
• Use
¢£¤¥ to highlight “CO Flash.”
• Press « until the appropriate CO Line hook-flash timing displays.
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Flash – PBX Line !3
Flash – PBX Line is a programmed setting that will determine what flash timing will be presented to the host
telephone system when the DX-80 is installed as a subordinate system. This feature is critical to perform accurate
host-system functions like PBX call transfer. When used “behind” a PBX, the DX-80 system extensions should have
the Flash feature code programmed onto a Flexible Feature Button for easy access.
Related Features
Speed Dial (System and Station) Memo Pad
Last Number Redial Automatic Redial
Related Programming
Call Handling – PBX Flash Time