Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-140
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+*] and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input 03-14, then press [
save
savesave
save]. This advances to the SLT Hook-flash programming.
• Press [show
showshow
show]. This advances to the Start screen.
• Press [chg
chgchg
chg] to change the Start Time to detect SLT hook-flash.
• Press [next
nextnext
next] to advance to the End screen.
• Press [chg
chgchg
chg] to change the End Time to stop detection of SLT hook-flash.
• Press the Hold button to return to the previous menu level or press
the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use ¢£¤¥ to highlight “Call Handling.” Then press «.
• Use
¢£¤¥ to highlight “Category 2.” Then press «.
• Use ¢£¤¥ to highlight “SLT Hook Flash – Start” or “…End.”
• Press
« until the appropriate timing displays.
• Continue making other programming changes as required.
• When you have completed all changes, press the ° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.