Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-136
Feature Key Reset !58
This feature is used to reset all Flexible Feature buttons to default settings. Reference the Flexible Feature Button
map in the Overview – Specifications section of this manual to review the layout of these feature keys.
Related Features
Extension Password Flexible Feature Button Programming
Operation
1. While the extension is idle (no call activity), press !58. The display prompts for the password”
PSWD :_
bksp show chg
2. Enter the extension password then press [show]. The display prompts for confirmation:
FTR KEY RESET
go
3. Press [go
gogo
go]. The operation is complete and you hear the confirmation tone.
Feature / Directory Number Lookup !/5
The DX-80 system has many features and codes. At times it may be difficult to remember the code for the necessary
feature. This feature code directory was implemented to aid in accessing the many features of the DX-80.
You can use the Feature/Directory Number Lookup to find the directory number and/or Feature Code and/or Suffix
Codes required to operate the various system features.
Related Features
Flexible System Numbering Plan All feature access codes
Operation
1. While the telephone is idle (no call activity), press !/5. The display shows
DIR#/CODE LOOKUP
dir ftr suffix
2. To find a system Directory Number, press [dir
dirdir
dir]. The first screen of directory number listings displays. If you
don’t see the system resource listed press [
next
nextnext
next] until the resource displays, then press that interactive
LCD button. (For example, to show the directory number assigned to CO Line Groups, press [
co gp
co gpco gp
co gp].
3. To find a system Feature Access Code, press [ftr
ftrftr
ftr]. Features are listed abbreviated and alphabetically.
(Note: All codes in this list require that the
! button be pressed preceding the code.)
4. To find a Suffix Code, press [
suffix
suffixsuffix
suffix]. The list of digits dialed after system resource directory numbers
displays.
5. Use the [
back
backback
back] and [next
nextnext
next] buttons to move through the display categories.
6. Use
the Hold button to return to a previous menu level.
7. Go off-hook them on-hook (or press the ON/OFF button twice) to exit Feature/Directory Number Lookup.